Meteorological Station Louver Box, Temperature Humidity CO2 Sensor, 9-30V, Anti Material - Easy Installation, Accurate Environmental Monitoring, Outdoor Indoor Use (YGC-BYX-M-KV-V2)

Item Type: Meteorological Station LouverMaterial: ABSWeight: Approx. 1266g / 44.7ozFeatures: Atmosphere Temperature, Atmosphere Humidity, Light Strength, CO2Power Supply: 9-30VProduct Size After Bending Plate Installation: Approx. 262x215mm/10.31x8.46inLouver Box Size: Approx. 140x127mm/5.51x5.00inLight Strength: Measuring Range 0-200000Lx (Outdoor), 0-65535Lx (Indoor) , Accuracy ±4%, Resolution 1Lx, Power Consumption 0.1mW CO2: Measuring Range 0-5000ppm, Accuracy ±(50ppm+5%), Resolution 1ppm, Power Consumption 100mWAtmosphere Temperature: Measuring Range -20-50℃ (Analog Signal Output), Accuracy ±0.3℃ (Standard), Resolution 0.1℃, Power Consumption 1mWAtmosphere Humidity: Measuring Range 0-100%RH, Accuracy ±5%RH (Standard), Resolution 0.1%RH, Power Consumption 1mW Sensor Total Power Consumption: Equal to Multielement Power Consumption and Main Board Basic Power ConsumptionOperating Environment: -40℃-+75℃Main Board Basic Power Consumption: 200mWProtective Level: IP54Wiring: Red Wire: VCC Positive Power SupplyGreen Wire: GND Negative Power SupplyBlack Wire: Signal Line 1Yellow Wire: Signal Line 2White Wire: Signal Line 3Brown Wire: Signal Line 4For Modbus CRC Check Steps: 1. Preset the 16 bit register to hexadecimal FFFF, call this register the CRC register;2. Dissimilarize the first 8 bits of data with the lower bit of the CRC register and place the result in the CRC register;3. Move the contents of the register one bit to the right (toward the low bit), fill the highest bit with a 0, and check the lowest bit;4. If the lowest bit is 0: repeat step 3 (move again) if the lowest bit is 1: the CRC register is iso orthogonal to the polynomial A001 (1010 0000 0000 0001);5. Repeat steps 3 and 4 until right shifted 8 times so that the entire 8 bit data is all processed;6. Repeat steps 2 to 5 for the next 8 bit

• 【Easy Installation】: Requires Only A Few Screws And One Signal Cable For Simple Wiring, Saving Time And Labor; Ideal For Quick Setup In Various Locations.
• 【Integrated Sensors】: Combines Atmospheric Temperature, Humidity, Light Strength, And CO2 Sensors Into One Unit To Provide Comprehensive Meteorological Data.
• 【Durable Material】: Made With Anti And Anti Aging ABS Material With High Reflectivity And Low Heat Conductivity, Suitable For Harsh Outdoor Conditions.
• 【Wide Application】: Supports Environmental Research, Agricultural Monitoring, And Weather Data Collection With Reliable, Precise Measurements.
• 【Compact And Functional Design】: One-Piece Louver Box With IP54 Protection Level Ensures Stability And Easy Maintenance For Indoor And Outdoor Installations.